2.GENERAL WELDING PROCEDURE(GWP) SMAW-1A, REV.4，第6.2節：「CLEANING-THE SURFACES OF ALL SHEET, PLATES, FROGINGS OR OTHER PARTS TO BE WELDED SHALL BE TRHOROUGHLY CLEANED OF ALL SCAL RUST, OIL GREASES OR OTHER FOREIGN MATTER FOR A DISTANCE APPROXIMATELY 1』 FROM THE EXOECTED WELD EDGES…」；第7.0節：「TACK WELDING SHALL BE IN ACCOEDANCE WITH THE APPLICABLE WPS…」；及第9.0節：
「THE WPS IDENTIFIES THE QUUALIFIED POSITIONS AND THE WELDING PARAMETERS. THE QUALITIY ASSURANCE ,ANAGER OR HIS DESIGNEE SHALL VERIFY THAT THE WELDING PARAMETERS FALL WITHIN THE SPECIFIED RANGE…」
違規條款：
違規內容：
視察一號機第七次大修有關SEPARATOR SHOULD HEAD BOLTS修理更換作業程序書不周全，且未依規範內容執行：
